ImageGear PDF v25.1 - Updated
PDF
User Guide > File Formats and Compressions > File Formats > File Formats Reference > PDF
Full Name Adobe PDF (Adobe Portable Document Format)
Format ID ImGearFormats.PDF
File Extension(s) *.pdf
Data Type Vector Image
Data Encoding Binary
Multi-Page Support Yes
Alpha Channel Support No
Metadata Update Support Document
ImageGear Platforms Support WIN32, WIN64, Unix, Unix64, MAC, .NET, .NET64
PDF format requires ImageGear.Formats.PDF. See Assembly Initialization for more information.

ImageGear Supported Versions

ImageGear Supported Features

ImageGear Read Support

ImageGear Write Support

ImageGear Filter Control Parameters

Filter Control Parameter Type Default Value Available Values Description
DefaultCompression ImGearCompressions Enumeration ImGearCompressions Enumeration.NONE Any ImGearCompressions Enumeration value This parameter specifies a compression used for encoding a raster page added/inserted into the PDF document by using ImGearDocument.Pages method.
Depth Int32 24 1, 8, 24 This parameter specifies bit depth in bits-per-pixel during the PDF document conversion into the raster image. The greater this value, the higher the quality of the raster image you get and the more memory required for rasterization. The DIB of the output raster image has this value as a bit count.
DrawMode ImGearPDFPageDrawMode enumeration ImGearPDFPageDrawMode.ENTIRE_PAGE One of the ImGearPDFPageDrawMode enumeration values

This parameter specifies default PDF rendering method used by the ImageGear PDF component to draw PDF page content.

To improve performance when scrolling in PDF documents you can change the DrawMode to ImGearPDFPageDrawMode.VISIBLE_AREA.

IndependentPagesize Bool false true, false If this parameter is false, when saving a raster image into the PDF document, the width and height of the newly created page is set to the width and height of the previous page from the PDF document. If the previous page does not exist, the width and height are calculated from the image resolution and size as follows:

Width = <width of the raster image> * 72 / <X DPI of the raster image>

Height = < height of the raster image> * 72 / <Y DPI of the raster image>

If the image resolution is not defined, the width and height are set to the width and height of the Letter page, which is 612 x 792. If this parameter is true, the following parameters are used to set the page size:

PageHeight

PageWidth

IncRend Bool False True, False This parameter specifies the way of drawing rendering. The true value sets incremental (stripe by stripe) rendering mode, the false value sets rendering as a single bitmap.
PageHeight Int32 0 Any non-negative value This parameter sets the height of the page (in 1/72 inches). If this option is 0, the height is calculated from the image resolution and size as follows:

Height = < height of the raster image> * 72 / <Y DPI of the raster image>

If the image resolution is not defined, the height is set to the height of the Letter page, which is 792. This parameter is not used if IndependentPagesize is false.

PageWidth Int32 0 Any non-negative value This parameter sets the width of the page (in 1/72 inches). If this option is 0, the width is calculated from the image resolution and size as follows:

Width = <width of the raster image> * 72 / <X DPI of the raster image>

If the image resolution is not defined, the width is set to the width of the Letter page, which is 612. This parameter is not used if IndependentPagesize is false.

Password String "" Any string This parameter specifies password string for password protected PDF documents.
PrintDepth Int32 8 1, 8, 24 This parameter specifies bit depth in bits-per-pixel during the PDF document printing. The greater this value, the higher the quality of the raster image you get and the more memory required for printing.
PrintResolutionX Int32 300 Any This parameter specifies the horizontal resolution in dots-per-inch during PDF document printing. The greater this value, the higher the quality of the printed image.
PrintResolutionY Int32 300 Any This parameter specifies the vertical resolution in dots per inch during the PDF document printing. The more this value the more quality image is printed.
Resolution3D UInt 72 Any, except zero This parameter specifies the resolution in dots per inch used for generating a pre-rendered bitmap of the default view of the 3D artwork. Producers should provide bitmaps of appropriate resolution for all intended uses of the document; i.e., a high-resolution bitmap for high-quality printing, and a default screen-resolution bitmap for on-screen viewing.
ResolutionX Int32 72 Any This parameter specifies the horizontal resolution in dots-per-inch during the PDF document conversion into a raster image. The greater this value, the higher the quality of the raster image you get after rasterization. The DIB of the output raster image has this value as an X resolution.
ResolutionY Int32 72 Any This parameter specifies the vertical resolution in dots-per-inch during the PDF document conversion into the raster image. The greater this value, the higher the quality of the raster image you get after rasterization. The DIB of the output raster image has this value as an Y resolution.
SaveFlags ImGearPDFSaveFlags Enumeration ImGearPDFSaveFlags Enumeration.FULL | ImGearPDFSaveFlags Enumeration.COLLECT_GARBAGE A bit composition of an OR of ImGearPDFSaveFlags Enumeration values This parameter specifies an option for saving a PDF file, which allows you to remove unreferenced objects, often reducing file size as well as to write a linearized file for page-served remote (network) access, and to control compression of content streams inside a PDF file.
SaveMajor Int32 0 1 Specifies major PDF version number of the document for saving. If major equals 0, both major and minor are ignored and the document is saved to the library's default version. Make sure that the document conforms to the version number you are setting.
SaveMinor Int32 0 6, 5, 4, etc. Specifies minor PDF version number of the document for saving. Make sure that the document conforms to the version number you are setting.
SmoothFlags ImGearPDFSmoothFlags Enumeration

13

ImGearPDFSmoothFlags Enumeration.SMOOTH_IMAGE | ImGearPDFSmoothFlags Enumeration.SMOOTH_TEXT | ImGearPDFSmoothFlags Enumeration.ENHANCE_THIN_LINES

A bit composition of an OR of ImGearPDFSmoothFlags Enumeration values This parameter specifies smooth settings for PDF rasterization.
SVGAcroformFeatures ImGearPDFToSVGAcroformFeatures Enumeration All All, None, PushButton, RadioButton, Checkbox, Text, ComboBox, ListBox, Signature When the conversion from PDF to SVG is performed the combinations of values of ImGearPDFToSVGAcroformFeatures defines the widget types that will be converted.
SVGAnnotationFeatures ImGearPDFToSVGAnnotationFeatures Enumeration All All, None, FreeText, Line, Square, Circle, Polygon, PolyLine, Widget When the conversion from PDF to SVG is performed the combinations of values of ImGearPDFToSVGAnnotationFeatures defines the annotation types that will be converted.
SVGBackgroundColor ImGearRGBQuad White Any RGB color Specifies the background color of the SVG file that has been converted from PDF.
TextEncoding ImGearPDFTextEncoding Enumeration ImGearPDFTextEncoding Enumeration.ASCII_85 Any ImGearPDFTextEncoding Enumeration value This parameter specifies which encoding scheme should be used to convert binary image data to the text format when saving raster image into the PDF document.
XFAAllowed Bool false true, false

Specifies whether to allow opening of PDF documents with embedded XFA content.

  • true - PDF documents with XFA content will not throw an exception on opening.
  • false - (default) PDF documents with XFA content will not open and will throw an exception.
  • In order to enable opening of PDF documents containing XFA data, you must first add the PDF filter, then initialize the pdf engine, and finally set XFAAllowed to true. See XFA SupportXFA Support for more details.
  • Form fields in documents containing XFA should not be modified. See also XFA Support for more information.

Comments

Please see the ImageGear.Formats.PDF Namespace and How to Work with PDF.

Support for PDF documents that contain XFA information is limited. See XFA Support.