ImageGear .NET v25.2 - Updated
FreeDirectionalLight Method




ImageGear.Processing.Advanced Assembly > ImageGear.Processing Namespace > ImGearEffects Class : FreeDirectionalLight Method
Image to apply free directional light effect to.
Direction to apply the effect across the image. The value is specified as an angle in degrees and ranges from 0 to 360.
Array of points containing relative light deviations along the period of the sine wave. Each value typically ranges from -1 to 1. The number of points is flexible and should be chosen based on the period length relative to the image size and desired resolution of the effect.
Controls the magnitude of color adjustment for each channel of the image. The number of elements of the array is typically set to the number of channels in the image. Each value should range from 0 to 2, although higher values are possible. 0 represents no change in the image color. Higher values represent more intense change. Color changes are clipped, so higher values result in a harder edge to the waveform.
Frequency of sine wave. The value should be from 0 to 0.5. The higher the frequency, the more bars will be visible.
Phase of sine wave. The value should be from 0 to 2*PI (approximately 6.28). As the phase is changed, the alignment of the bars is changed. This can be used to line up the bars with image content or boundaries.
Attenuation of sine wave. The value should be from -0.01 to 0.01. Attenuation adjusts how much the amplitude of the sine wave is decreased or increased as the sine wave proceeds. It can be used to cause the lighting to fade or intensify.
This method changes the colors of an image according to the pattern of a sine wave.
Syntax
'Declaration
 
Public Shared Sub FreeDirectionalLight( _
   ByVal page As ImGearRasterPage, _
   ByVal direction As Single, _
   ByVal points() As Single, _
   ByVal amplitude() As Single, _
   ByVal frequency As Single, _
   ByVal phase As Single, _
   ByVal attenuation As Single _
) 
'Usage
 
Dim page As ImGearRasterPage
Dim direction As Single
Dim points() As Single
Dim amplitude() As Single
Dim frequency As Single
Dim phase As Single
Dim attenuation As Single
 
ImGearEffects.FreeDirectionalLight(page, direction, points, amplitude, frequency, phase, attenuation)
public static void FreeDirectionalLight( 
   ImGearRasterPage page,
   float direction,
   float[] points,
   float[] amplitude,
   float frequency,
   float phase,
   float attenuation
)
public: static void FreeDirectionalLight( 
   ImGearRasterPage* page,
   float direction,
   float[]* points,
   float[]* amplitude,
   float frequency,
   float phase,
   float attenuation
) 
public:
static void FreeDirectionalLight( 
   ImGearRasterPage^ page,
   float direction,
   array<float>^ points,
   array<float>^ amplitude,
   float frequency,
   float phase,
   float attenuation
) 

Parameters

page
Image to apply free directional light effect to.
direction
Direction to apply the effect across the image. The value is specified as an angle in degrees and ranges from 0 to 360.
points
Array of points containing relative light deviations along the period of the sine wave. Each value typically ranges from -1 to 1. The number of points is flexible and should be chosen based on the period length relative to the image size and desired resolution of the effect.
amplitude
Controls the magnitude of color adjustment for each channel of the image. The number of elements of the array is typically set to the number of channels in the image. Each value should range from 0 to 2, although higher values are possible. 0 represents no change in the image color. Higher values represent more intense change. Color changes are clipped, so higher values result in a harder edge to the waveform.
frequency
Frequency of sine wave. The value should be from 0 to 0.5. The higher the frequency, the more bars will be visible.
phase
Phase of sine wave. The value should be from 0 to 2*PI (approximately 6.28). As the phase is changed, the alignment of the bars is changed. This can be used to line up the bars with image content or boundaries.
attenuation
Attenuation of sine wave. The value should be from -0.01 to 0.01. Attenuation adjusts how much the amplitude of the sine wave is decreased or increased as the sine wave proceeds. It can be used to cause the lighting to fade or intensify.
Remarks
The image will appear to have regularly spaced bars of light and/or shadow overlaid on top of it.
See Also

Reference

ImGearEffects Class
ImGearEffects Members
ImGearRasterPage Class

Is this page helpful?
Yes No
Thanks for your feedback.