 AdditionalReadingPass | Enable additional processing pass on a scaled (reduced) version of the original image. This is strictly an extra analysis step. |
| AustralianPostCustomDecodeMode | The method to be used in decoding the customer section of the Australian Post barcode |
| BarcodeAppendCheckSum | Append checksum value to the barcode value in recognition. |
| BarcodeCap | Returns the barcode capability and performance for the system. |
| BarcodeCodeName | Name of the recognized barcode. |
| BarcodeH | Height of the image area of the recognized barcode. |
| BarcodeIncludeControlCharacters | Insert control characters into the barcode value |
| BarcodeInkColor | Ink color of barcodes to search for in recognition. |
| BarcodeOrientation | Orientation of barcodes to search for in recognition. |
| BarcodeResult | String value of the recognized barcode. |
| BarcodeResultStyle | Enumeration type of the recognized barcode. |
| BarcodeSkew | Angle of the recognized barcode. |
| BarcodeType | This property has been deprecated and replaced by the SetBarcodeReaderType, GetBarcodeReaderTypesCount and GetBarcodeReaderType methods. |
| BarcodeW | Width of the image area of the recognized barcode. |
| BarcodeX | X-Coordinate of the image area of the recognized barcode. |
| BarcodeX1 | X-Coordinate of the top, left point of the recognized barcode. |
| BarcodeX2 | X-Coordinate of the top, right point of the recognized barcode. |
| BarcodeX3 | X-Coordinate of the bottom, right point of the recognized barcode. |
| BarcodeX4 | X-Coordinate of the bottom, left point of the recognized barcode. |
| BarcodeY | Y-Coordinate of the image area of the recognized barcode. |
| BarcodeY1 | Y-Coordinate of the top, left point of the recognized barcode. |
| BarcodeY2 | Y-Coordinate of the top, right point of the recognized barcode. |
| BarcodeY3 | Y-Coordinate of the bottom, right point of the recognized barcode. |
| BarcodeY4 | Y-Coordinate of the bottom, left point of the recognized barcode. |
| ChecksumCharCount | Number of characters in the recognized checksum. |
| ChecksumOK | Check if there is a valid checksum value for the recognized barcode. |
| Code39StartStopPatternsAreMandatory | Disable detection of Code 39 / Code 39 Extended barcodes without start and stop patterns when set to true (default value). |
| Confidence | Confidence of the barcode that was recognized. |
| Debug | Specifies the state of debug logging for the component. |
| DebugErrorLevel | Specifies the level of error information in the debug log. |
| DebugLogFile | Contains the full path name of the log file. |
| ErrorCode | Returns the number value of the last error. |
| ErrorDescription | Gets a description of the error for this object. |
| ErrorLevel | Deprecated, use DebugErrorLevel. Specifies the level of error information in the debug log. |
| EvaluationMode | If the control is using a trial license, this property determines the behavior of the control to be either display of nag screens or timeouts of the control. |
| Font | Font of the barcode value written as text adjacent to the barcode being created. |
| GrayscaleProcessing | Enable grayscale processing on applicable images in recognition. This is strictly an extra analysis step. |
| hDIB | This property has been deprecated and replaced by the AnalyzehDib method. |
| hDIB64 | This property has been deprecated and replaced by the AnalyzehDib64 method. |
| ImageSource | This property has been deprecated and replaced by the AnalyzehDib and AnalyzeIPicture methods. |
| MakeBarcodeAdjustBarSize | Allows for dynamic setting of the width of the bars when creating a barcode. |
| MakeBarcodeAutoSize | Allows for dynamic sizing of the image when creating a barcode. |
| MakeBarcodeBarSize | Minimum width of the bars when creating a barcode. |
| MakeBarcodeBHeight | Sets the amount of white space on the top and bottom of the created barcode. |
| MakeBarcodeBWidth | Sets the amount of white space to the right and left of the created barcode. |
| MakeBarcodeCBarSize | Returns the width of a single width bar used to create the barcode. |
| MakeBarcodeColumns | Number of columns to create in a 2D barcode |
| MakeBarcodeColumnsCreated | Number of columns created in the barcode |
| MakeBarcodeDataValueLength | Gets the length of the current barcode data |
| MakeBarcodeDIB | Returns the barcode Device Independent Bitmap for 32-bit environment. |
| MakeBarcodeDIB64 | Returns the barcode Device Independent Bitmap for 64-bit environment. |
| MakeBarcodeErrorCorrectionLevel | Error correction level to using in a 2D barcode, ignored if not supported by the barcode type |
| MakeBarcodeErrorCorrectionLevelUsed | Error correction level used in the created barcode |
| MakeBarcodeHeight | Height of the new image in which the created barcode will be drawn. |
| MakeBarcodeMinHeight | Minimum height of the bars when creating a barcode. |
| MakeBarcodePic | Returns a handle to the barcode picture. |
| MakeBarcodeRHeight | Returns the height of the image needed to create the barcode. |
| MakeBarcodeRows | Number of rows to be created in a 2D barcode |
| MakeBarcodeRowsCreated | Number of rows created in the barcode |
| MakeBarcodeRWidth | Returns the width of the image needed to create the barcode. |
| MakeBarcodeShowValue | Determines whether the barcode value is written as text adjacent to the created barcode. |
| MakeBarcodeStyle | Type of barcode to create. |
| MakeBarcodeUPCNotchPercent | Notch percent of the barcode for the text value. Used by supported barcodes only (ie. UPC-A, EAN13), otherwise this value is ignored. |
| MakeBarcodeValue | String value of the barcode being created. |
| MakeBarcodeValueGap | Sets the amount of gap between the text and barcode when creating a barcode. |
| MakeBarcodeValueLRGap | Sets the vertical offset of outside text. Used by supported barcodes only (ie. UPC-A, EAN13), otherwise this value is ignored. |
| MakeBarcodeValueOFont | Sets the font used to display the UPC values that appear outside of the left and right guard bars. |
| MakeBarcodeValueOGap | Sets the amount of gap between the outside text and barcode when creating a barcode. Used by supported barcodes only (ie. UPC-A, EAN13), otherwise this value is ignored. |
| MakeBarcodeWidth | Width of the new image in which the created barcode will be drawn. |
| MaxBarcodes | Maximum number of barcodes to recognize. Processing will halt after this number of barcodes have been found. |
| MinimumBarcodeSize | Minimum barcode size required to return a valid result. |
| ModeTransitionIndex | The index in the barcode value for a previously retrieved mode-transition. |
| ModeTransitionType | The type of transition associated with a previously retrieved mode-transition. |
| NumBarcodes | Number of barcodes recognized. |
| NumModeTransitions | The number of mode-transitions present in a barcode result. |
| Picture | This property has been deprecated and replaced by using the AnalyzeIPicture method. |
| RaiseExceptions | Determines if errors are raised as exceptions in the application. |
| ReaderAreaHeight | The height, in pixels, of the region of interest. |
| ReaderAreaWidth | The width, in pixels, of the region of interest. |
| ReaderAreaX | The left edge coordinate, in pixels, of the region of interest. |
| ReaderAreaY | The top edge coordinate, in pixels, of the region of interest. |
| ReaderScanDistance | Distance between scans when searching for 1D barcodes |
| Result2DColumns | The number of columns in the barcode as defined by the indicator pattern. |
| Result2DColumnsDetected | The number of columns detected in the barcode image. |
| Result2DErrorCorrectionLevel | The amount of error correction detected for barcodes that support it. |
| Result2DRows | The number of rows in the barcode as defined by the indicator pattern. |
| Result2DRowsDetected | The number of rows detected in the barcode image. |
| ResultLen | Length of the result string. |
| ReturnPossibleBarcodes | Include possible barcodes in the result list. |
| RoyalMailVariableLengthDecoding | Enables decoding of Royal Mail barcodes of any length. If set to false, only Royal Mail barcodes matching the lengths in the RM4SCC specification will be decoded. |
| SSError | This property has been deprecated and replaced by the ErrorCode property. |
| SSErrorMsg | This property has been deprecated and replaced by the ErrorDescription property. |
| WriteChecksumChar | Sets the checksum write flag for barcodes that optionally use checksums. |
AboutBox