PrizmDoc Viewer v13.22 Release - Updated
Administrator Guide / PrizmDoc Server / Installing / Installing with Traditional Linux Install Packages (deprecated) / Install Using Traditional Linux Install Packages on a Headless Environment
In This Topic
    Install Using Traditional Linux Install Packages on a Headless Environment
    In This Topic

    Introduction

    DEPRECATION NOTICE: While we currently continue to offer and support traditional Linux packages for direct installation on a Linux host, these have largely become obsolete now that Docker deployment is an option. We have announced deprecation of our traditional Linux install packages and, in a future product release, we intend to only offer our Docker-based deployment option. The rest of this topic applies to traditional Linux install packages only.

    Use the following steps to install PrizmDoc in a Linux headless environment:

    IMPORTANT: PrizmDoc requires a clean installation when migrating from a version earlier than v12.0. You must first uninstall any previous versions of PrizmDoc and reboot your system. Only then should you install PrizmDoc v12.0 or later. Make sure you back up your configuration files before uninstalling any previous versions of PrizmDoc. Once you have installed v12.0, you do not need to uninstall if you want to migrate to v12.1 or later.

    NOTE: If you have an updated license, you must re-start PAS and PrizmDoc Server in order to use the new license.

    Make sure you log in as root to the machine. All command lines preceded by the '>' sign are the example output of that command, where applicable.

    Verify the System's Locale

    1. To ensure your system's locale is specified, run the command:

      Example

       locale
      
      
    2. If the LC_ALL entry is not set, you must specify it with the following:

      Example

       export LC_ALL="en_US.UTF-8"
       sudo localedef -v -c -i en_US -f UTF-8 en_US.UTF-8
      
      

    Step 1 - Download PrizmDoc

    IMPORTANT: Before you download PrizmDoc, note that packages are only available for 64-bit systems.

    1. Download PrizmDoc from the website by selecting the desired Linux Distribution.

      OR

    2. Download directly to the Linux server using the 'wget' command for the specific distribution as shown below:

    NOTES:

    1. You must substitute the version of the package you are using in the code examples below. For example, if you are using v13.8, then specify "13.8" instead of "<version>". If the version is a hot fix, you will also need to specify the hot fix number, for example, "13.8.1".
    2. Instructions assume that 'wget' has already been installed on the server OS.

      Red Hat Enterprise Linux and CentOS v7 (and later)

      Example
      wget http://products.accusoft.com/PrizmDoc/<version>/prizmdoc_server_<version>.RHEL7.tar.gz
      
      

      Ubuntu Linux Distributions

      Example
      wget http://products.accusoft.com/PrizmDoc/<version>/prizmdoc_server_<version>.amd64.deb.tar.gz
      
      

      Generic .tar.gz Distribution

      Example
      wget http://products.accusoft.com/PrizmDoc/<version>/prizmdoc_server_<version>.x86_64.tar.gz
      
      

      For license questions, please contact info@accusoft.com.

    Step 2 - Unpack and Install the Downloaded Archive

    Open a command line and change to the location where you downloaded the tarball. Use the following command line examples appropriate for your distribution to:

    1. Decompress and unpack the downloaded file. After you have unpacked the archive, the contents will have been decompressed into directories named: prizmdoc_client_<version>.<arch>[.rpm|.deb] and prizmdoc_server_<version>.<arch>[.rpm|.deb].
    2. Change to the unpacked directory and install the packages.

      Red Hat, CentOS, and Older Linux Distributions

      The following example is for Red Hat, CentOS, and older Linux distributions:

      Viewer Example
       tar -xzvf prizmdoc_client_*.tar.gz
       cd prizmdoc_client_*
       yum install --nogpgcheck *.rpm
      
      
      Server Example
       tar -xzvf prizmdoc_server_*.tar.gz
       cd prizmdoc_server_*
       yum install --nogpgcheck *.rpm
      
      

      The Prizm installer does not install them automatically. Please manually download these packages and then install them using --nogpgcheck flag as follows:

      Example
       yum install --nogpgcheck ./openjpeg-libs-1.3-7.el5.x86_64.rpm
       yum install --nogpgcheck ./pixman-0.22.0-2.2.el5_10.x86_64.rpm
      
      

      Ubuntu Linux Distributions

      The following example is for Ubuntu Linux distributions:

      Viewer Example
       tar -xzvf prizmdoc_client_*.deb.tar.gz
       cd prizmdoc_client_*.deb
       sudo dpkg -i *.deb
       # 'dpkg' does not resolve dependencies automatically, so please ignore possible errors, if you did not install required dependencies yet, and invoke next commands
       sudo apt-get update
       sudo apt-get -f install
      
      
      Server Example
       tar -xzvf prizmdoc_server_*.deb.tar.gz
       cd prizmdoc_server_*.deb
       sudo dpkg -i *.deb
       # 'dpkg' does not resolve dependencies automatically, so please ignore possible errors, if you did not install required dependencies yet, and invoke next commands
       sudo apt-get update
       sudo apt-get -f install
      
      

      Generic .tar.gz Distribution

      We also provide a generic .tar.gz package. Please review the System Requirements and Supported Environments topic to ensure compatibility. You will also need to install the dependencies described in the Requirements section. Once the dependencies are installed, you can install the .tar.gz with the following commands as root:

      Viewer Example
       tar -xzvf prizmdoc_client*.tar.gz
       cd prizmdoc_client_*
       ls prizm-*.tar.gz | xargs -n1 tar zxf
       cp -R prizm /usr/share/
      
      
      Server Example
       tar -xzvf prizmdoc_server*.tar.gz
       cd prizmdoc_server_*
       ls prizm-*.tar.gz | xargs -n1 tar zxf
       cp -R prizm /usr/share/
      
      

      The generic version of PrizmDoc requires MongoDB 4.2.15, which is not included in the package and should be installed manually:

      Example
       # Download mongodb 4.2.15 for example for Ubuntu18.04
       # if you have another OS, go to https://www.mongodb.com/try/download/community and download a corresponding tgz package
       #
       wget https://fastdl.mongodb.org/linux/mongodb-linux-x86_64-ubuntu1804-4.2.15.tgz
      
       # Create necessary folders inside PrizmDoc dir installation
       mkdir -p /usr/share/prizm/services/mongo-manager-service/bin/mongodb/data
      
       # Unpack the mongodb archive to the PrizmDoc folder
       tar -xzvf mongodb-linux-x86_64-ubuntu1804-4.2.15.tgz -C /usr/share/prizm/services/mongo-manager-service/bin/mongodb --strip-components=1
      
       # Note that mongodb requires 'libcurl4' and 'openssl' packages
       # to install them on Ubuntu, run the following command
       apt-get install libcurl4 openssl
      
       # on Red Hat and CentOS
       yum install libcurl openssl
      
       # verify mongodb by running the following commands
       cd /usr/share/prizm/services/mongo-manager-service/bin/mongodb/bin
       ./mongod --version
      
      
      
    3. Add symbolic links to the fonts directory and update system fonts cache to enable the usage of installed fonts by PrizmDoc services.

      Server Example
       ln -s /usr/share/prizm/modules/poppler/fonts/accusoft_prizm_fonts.conf
       /etc/fonts/conf.d/99-accusoft_prizm_fonts.conf fc-cache -f
      
      

    Step 3 - Configure Your License

    1. If you have a paid license, configure your license (see Licensing for more information). If you are evaluating the product, you can skip this step.

    Step 4 - Verify that the Installation was Successful

    1. Start PrizmDoc Server:

       /usr/share/prizm/scripts/pccis.sh start
      
      

      See Starting and Stopping PrizmDoc Server on Linux for more information.

    2. Wait for PrizmDoc Server to become healthy. Poll http://yourserver:18681/PCCIS/V1/Service/Current/Health with a GET request until it returns HTTP 200, indicating the server is healthy. See the Health Status API for more information.

    Once PrizmDoc Server reports healthy, your installation is complete.