PS

Full Name	Adobe PS (Adobe PostScript)
Format ID	IG_FORMAT_POSTSCRIPT = 102
File Extension(s)	.ps, .eps
Data Type	Vector Image
Data Encoding	Binary
Color Profile Support	No
Multi-Page Support	Yes
Alpha Channel Support	No

To support the PS format, attach the ImageGear PDF Component to Core ImageGear. See the PDF Getting Started with PDF section.

ImageGear Supported Versions:

Adobe® PS v3

ImageGear Supported Features:

IG_FLTR_DETECTSUPPORT - autodetection
IG_FLTR_PAGEREADSUPPORT - single page file reading
IG_FLTR_MPAGEREADPSUPPORT - multi-page file reading
IG_FLTR_PAGEINSERTSUPPORT - single-page file writing
IG_FLTR_MPAGEWRITEPSUPPORT - multi-page file writing
IG_FLTR_PAGEDELETESUPPORT - page deleting from multi-page file
IG_FLTR_PAGESWAPSUPPORT - page swapping in multi-page files

ImageGear Read Support:

IG_COMPRESSION_NONE:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_DEFLATE:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_RLE:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_CCITT_G3:
- Indexed RGB: 1 bpp
IG_COMPRESSION_CCITT_G4:
- Indexed RGB: 1 bpp
IG_COMPRESSION_CCITT_G32D:
- Indexed RGB: 1 bpp
IG_COMPRESSION_JPEG:
- Indexed RGB: 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_JPEG2K:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_LZW:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp

ImageGear Write Support:

IG_COMPRESSION_NONE:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_DEFLATE:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_RLE:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_CCITT_G3:
- Indexed RGB: 1 bpp
IG_COMPRESSION_CCITT_G4:
- Indexed RGB: 1 bpp
IG_COMPRESSION_CCITT_G32D:
- Indexed RGB: 1 bpp
IG_COMPRESSION_JPEG:
- Indexed RGB: 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_JPEG2K:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp;
- RGB: 24 bpp;
- CMYK: 32bpp
IG_COMPRESSION_LZW:
- Indexed RGB: 1,4,8 bpp;
- Grayscale - 8 bpp

ImageGear Filter Control Parameters:

Filter Control Parameter	Type	Default Value	Available Values	Description
AUTO_POSITION	AT_BOOL	TRUE	TRUE, FALSE	Enables/disables AutoPositionEPSFiles option for reading PS/EPS file format.
DEPTH	UINT	24	1, 8, 24	Specifies bit depth in bits per pixels during the PostScript document conversion into the raster image. A higher value indicates a higher quality raster image and a larger amount of memory required for rasterization. The DIB of the output raster image has this value as a bit count.
HEIGHT	UINT	0	Any positive integer	Specifies the height of PS page to load.
INDEPENDENT_PAGESIZE	AT_BOOL	FALSE	TRUE, FALSE	(Used with PostScript write only.) If this parameter is FALSE, when saving a raster image into the PostScript document, the width and height of the newly created page is set to the width and height of the previous page in the PostScript document. If the previous page does not exist, the width and height are calculated from the image resolution and size as follows: Width = <width of the raster image> * 72 / <X DPI of the raster image> Height = <height of the raster image> * 72 / <Y DPI of the raster image> If the image resolution is not defined, the width and height are set to the width and height of the Letter page, which is 612x792. If this parameter is TRUE, use the PAGE_HEIGHT and PAGE_WIDTH parameters to set the page size.
JOB_OPTIONS_FILE	LPSTR	N/A	Any string	Specifies JobOptions file name.
LEVEL	UINT	IG_PS_LEVEL_3 = 3	IG_PS_LEVEL_1 = 1 - language level 1 IG_PS_LEVEL_2 = 2 - language level 2 IG_PS_LEVEL_3 = 3 - language level 3	(Used with PostScript write only.) Specifies a language level of the output PostScript 3.0 document when saving to PostScript.
PAGE_HEIGHT	UINT	0	Any non-negative value	(Used with PostScript write only.) This parameter sets the height of the page (in 1/72 inches). If this option is 0, the height is calculated from the image resolution and size as follows: Height = <height of the raster image> * 72 / <Y DPI of the raster image> If the image resolution is not defined, the height is set to the height of an Letter page, which is 792. This option is not used if INDEPENDENT_PAGESIZE is FALSE.
PAGE_WIDTH	UINT	0	Any non-negative value	(Used with PostScript write only.) This parameter sets the width of the page (in 1/72 inches). If this option is 0, the width is calculated from the image resolution and size as follows: Width = <width of the raster image> * 72 / <X DPI of the raster image> If the image resolution is not defined, the width is set to the width of the Letter page, which is 612. This option is not used if INDEPENDENT_PAGESIZE is FALSE.
READ_PREVIEW	AT_BOOL	FALSE	TRUE, FALSE	Specifies whether to allow viewing a preview.
RESOLUTION_X	UINT	72	Any positive value, inclusively between 1 and 2147483647	This parameter specifies the horizontal resolution in dots per inch during the PostScript/PDF document conversion into the raster image. A higher value indicates a higher quality raster image after rasterization. The DIB of the output raster image has this value as an X resolution.
RESOLUTION_Y	UINT	72	Any positive value, inclusively between 1 and 2147483647	This parameter specifies the vertical resolution in dots per inch during the PostScript/PDF document conversion into the raster image. A higher value indicates a higher quality raster image after rasterization. The DIB of the output raster image has this value as an X resolution.
SMOOTH_FLAGS	UINT	0	A bit composition of an OR of the following values: 1 - Draw smooth text 2 - Draw smooth line art 4 - Draw smooth image 8 - Enhance thin lines	Specifies smooth settings for PostScript rasterization.
TEXT_ENCODING	UINT	IG_PDF_TEXTENC_ASCII_85	IG_PDF_TEXTENC_NONE = 1 - no encoding used IG_PDF_TEXTENC_ASCII_85 = 2 - ASCII 85 encoding used IG_PDF_TEXTENC_ASCII_HEX = 3- ASCII HEX encoding used	(Used with PostScript write only.) Specifies which encoding scheme should be used to convert binary image data to the text format when saving raster image into a PostScript document.
TYPE	UINT	IG_POSTSCRIPT = 0	IG_POSTSCRIPT = 0 - PS file IG_EPS_NO_PREVIEW = 1 - EPS file with no preview IG_EPS_STANDARD_PREVIEW = 2 - EPS file with standard preview IG_EPS_EXTENDED_PREVIEW = 3 - EPS file with extended preview	(Used with PostScript write only.) This parameter specifies a type of the output PostScript document when saving to PostScript.
USE_CROP_BOX	AT_BOOL	TRUE	TRUE, FALSE	Specifies whether to use PostScript crop box rectangle for page layout. TRUE - use PostScript crop box rectangle for page layout FALSE - use PostScript media rectangle for page layout
WIDTH	UINT	0	Any positive value	Specifies the width of PS page to load.

Comments:

Please see the section Using ImageGear PDF Component.