IG_FX_free_directional

This function changes the colors of an image according to the pattern of a sine wave; the image will appear to have regularly spaced bars of light and/or shadow overlaid on top of it.

Declaration:

	Copy Code
AT_ERRCOUNT ACCUAPI IG_FX_free_directional_light( HIGEAR hIGear, AT_FLOAT angle, AT_INT pointCount, AT_FLOAT points[], AT_INT channelCount, AT_FLOAT amplitude[], AT_FLOAT frequency, AT_FLOAT phase, AT_FLOAT attenuation );

Copy Code

AT_ERRCOUNT ACCUAPI IG_FX_free_directional_light(
        HIGEAR  hIGear, 
        AT_FLOAT angle, 
        AT_INT  pointCount, 
        AT_FLOAT points[], 
        AT_INT channelCount,
        AT_FLOAT amplitude[], 
        AT_FLOAT frequency, 
        AT_FLOAT phase, 
        AT_FLOAT attenuation
);

Arguments:

Name	Type	Description
hIGear	HIGEAR	Image to which to apply free directional light effect.
angle	AT_FLOAT	Direction to apply the effect across the image. The value is specified as an angle in degrees and ranges from 0 to 360.
pointCount	AT_INT	Length of the points array.
points	AT_FLOAT[ ]	Array of points containing relative light deviations along the period of the sine wave. Each value typically ranges from -1 to 1. The number of points is flexible and should be chosen based on the period length relative to the image size and desired resolution of the effect.
channelCount	AT_INT	Number of image channels to which to apply the effect.
amplitude	AT_FLOAT[ ]	Controls the magnitude of color adjustment for each channel of the image. The number of elements of the array is typically set to the number of channels in the image. Each value should range from 0 to 2, although higher values are possible. 0 represents no change in the image color. Higher values represent more intense change. Color changes are clipped, so higher values result in a harder edge to the waveform. Array length must be equal to channelCount.
frequency	AT_FLOAT	Frequency of sine wave. The value should be from 0 to 0.5. The higher the frequency, the more bars will be visible.
phase	AT_FLOAT	Phase of sine wave. The value should be from 0 to 2*PI (approximately 6.28). As the phase is changed, the alignment of the bars is changed. This can be used to line up the bars with image content or boundaries.
attenuation	AT_FLOAT	Attenuation of sine wave. The value should be from -0.01 to 0.01. Attenuation adjusts how much the amplitude of the sine wave is decreased or increased as the sine wave proceeds. It can be used to cause the lighting to fade or intensify.

Return Value:

Returns the number of ImageGear errors that occurred during this function call.

Supported Raster Image Formats:

All pixel formats supported by ImageGear for C and C++, except:
Indexed RGB - 1 bpp;
Indexed RGB with non-grayscale palette.

Sample:

Image Processing