Console Application

In this tutorial, you will configure a C# or VB.NET project for a console application and use ImageGear .NET PDF capabilities. You will also learn how to open a PDF or PS file and save it as a new file.

The following tutorial refers specifically to 64-bit installations; for 32-bit installations:

Your project should already be set to compile to target Debug and x86, and you should have the directory: $YOURLOCALPROJ\bin\x86\Debug\.
Throughout these instructions, replace x64 with x86.
The 32-bit ImageGear binaries are found in $INSTALLDIR\ImageGear .NET v24\Bin\

Using the desired version of Visual Studio (2010 or later):

Create a new "Console Application" project, using C# or VB.NET, and name the project: my_first_PDF_project
If you installed ImageGear .NET 64-bit, using the Configuration Manager, create a new project platform (if you don't have one already) for x64. Make sure your project is set to compile targeting Debug and x64. Confirm you now have $YOURLOCALPROJ\bin\x64\Debug\, and if it's not there, create it.
Add references and required resources into your projects in one of the following ways:
- Recommended: use our NuGet Packages. For this project, you need the following package:
  Accusoft.ImageGear.PDF.nupkg (https://www.nuget.org/packages/Accusoft.ImageGear.PDF/ )
- Manually:
  - Copy all files (and folders) inside $INSTALLDIR\ImageGear .NET v24 64-bit\Bin\ to your local output bin directory in your project (i.e., $YOURLOCALPROJ\bin\x64\Debug\ ).
  - Add the following references to your project from $YOURLOCALPROJ\bin\x64\Debug\:
    - ImageGear24.Core.dll
    - ImageGear24.Evaluation.dll
    - ImageGear24.Formats.Common.dll
    - ImageGear24.Formats.Pdf.dll
    - ImageGear24.Formats.Vector.dll
Your output target directory should be set to $YOURLOCALPROJ\bin\x64\Debug\ .

At this point all necessary assembly references and resources have been added to the project. The following code snippet can be used to load a PDF and save it as new file. Make sure to replace C:\PATHTOPDF\ with your own PDF file name and path:

CS
VBNET

C#	Copy Code
using System.IO; using ImageGear.Core; using ImageGear.Formats; using ImageGear.Formats.PDF; using ImageGear.Evaluation; namespace my_first_PDF_project { class Program { public void SaveAs(string fileIn, string fileOut) { // Initialize evaluation license. ImGearEvaluationManager.Initialize(); ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark; // Initialize common formats. ImGearCommonFormats.Initialize(); // Add support for PDF and PS files. ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat()); ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat()); ImGearPDF.Initialize(); using (FileStream inStream = new FileStream(fileIn, FileMode.Open)) { using (FileStream outStream = new FileStream(fileOut, FileMode.Create)) { // Load PDF document. ImGearDocument igDocument = ImGearFileFormats.LoadDocument(inStream); // Save PDF. ImGearPDFSaveOptions pdfOptions = new ImGearPDFSaveOptions(); ImGearFileFormats.SaveDocument(igDocument, outStream, 0, ImGearSavingModes.OVERWRITE, ImGearSavingFormats.PDF, pdfOptions); } } // Dispose of the PDF component. ImGearPDF.Terminate(); } static void Main(string[] args) { Program myProgram = new Program(); myProgram.SaveAs(@"C:\PATHTOPDF\FILENAME.pdf",@"C:\PATHTOPDF\NEWNAME.pdf"); } } }

Copy Code

using System.IO;

using ImageGear.Core;
using ImageGear.Formats;
using ImageGear.Formats.PDF;
using ImageGear.Evaluation;

namespace my_first_PDF_project
{
   class Program
   {
       public void SaveAs(string fileIn, string fileOut)
       {
           // Initialize evaluation license.
           ImGearEvaluationManager.Initialize();
           ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark;

           // Initialize common formats.
           ImGearCommonFormats.Initialize();

           // Add support for PDF and PS files.
           ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat());
           ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat());
           ImGearPDF.Initialize();

           using (FileStream inStream = new FileStream(fileIn, FileMode.Open))
           {
               using (FileStream outStream = new FileStream(fileOut, FileMode.Create))
               {
                   // Load PDF document.
                   ImGearDocument igDocument = ImGearFileFormats.LoadDocument(inStream);

                   // Save PDF.
                   ImGearPDFSaveOptions pdfOptions = new ImGearPDFSaveOptions();
                   ImGearFileFormats.SaveDocument(igDocument, outStream, 0, ImGearSavingModes.OVERWRITE, ImGearSavingFormats.PDF, pdfOptions);
               }
           }
           // Dispose of the PDF component.
           ImGearPDF.Terminate();   
       }

       static void Main(string[] args)
       {
           Program myProgram = new Program();
           myProgram.SaveAs(@"C:\PATHTOPDF\FILENAME.pdf",@"C:\PATHTOPDF\NEWNAME.pdf");
       }
   }
}

VB.NET	Copy Code
Imports System.IO Imports ImageGear.Core Imports ImageGear.Formats Imports ImageGear.Formats.PDF Imports ImageGear.Evaluation Module Module1 Public Sub SaveAs(fileIn As String, fileOut As String) ' Initialize evaluation license. ImGearEvaluationManager.Initialize() ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark ImGearCommonFormats.Initialize() ' Add support for PDF and PS files. ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat()) ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat()) ImGearPDF.Initialize() Using inStream As New FileStream(fileIn, FileMode.Open) Using outStream As New FileStream(fileOut, FileMode.Create) ' Load PDF document. Dim igDocument As ImGearDocument = ImGearFileFormats.LoadDocument(inStream) ' Save PDF. Dim pdfOptions As New ImGearPDFSaveOptions() ImGearFileFormats.SaveDocument(igDocument, outStream, 0, ImGearSavingModes.OVERWRITE, ImGearSavingFormats.PDF, pdfOptions) End Using End Using ' Dispose of the PDF component. ImGearPDF.Terminate() End Sub Sub Main() SaveAs("C:\PATHTOPDF\FILENAME.pdf", "C:\PATHTOPDF\NEWNAME.pdf.pdf") End Sub End Module

VB.NET

Copy Code

Imports System.IO

Imports ImageGear.Core
Imports ImageGear.Formats
Imports ImageGear.Formats.PDF
Imports ImageGear.Evaluation

Module Module1
   Public Sub SaveAs(fileIn As String, fileOut As String)
       ' Initialize evaluation license.
       ImGearEvaluationManager.Initialize()
       ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark

       ImGearCommonFormats.Initialize()

       ' Add support for PDF and PS files.
       ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat())
       ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat())
       ImGearPDF.Initialize()

       Using inStream As New FileStream(fileIn, FileMode.Open)
           Using outStream As New FileStream(fileOut, FileMode.Create)
               ' Load PDF document.
               Dim igDocument As ImGearDocument = ImGearFileFormats.LoadDocument(inStream)

               ' Save PDF.
               Dim pdfOptions As New ImGearPDFSaveOptions()
               ImGearFileFormats.SaveDocument(igDocument, outStream, 0, ImGearSavingModes.OVERWRITE, ImGearSavingFormats.PDF, pdfOptions)
           End Using
       End Using
       ' Dispose of the PDF component.
       ImGearPDF.Terminate()
   End Sub

   Sub Main()
       SaveAs("C:\PATHTOPDF\FILENAME.pdf", "C:\PATHTOPDF\NEWNAME.pdf.pdf")
   End Sub

End Module

Now, let's go over some of the important areas in the sample code with more detail. To initialize and support processing of PDF and PS files we need:

CS
VBNET

C#	Copy Code
// Initialize evaluation license. ImGearEvaluationManager.Initialize(); ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark; // Initialize common formats. ImGearCommonFormats.Initialize(); // Add support for PDF and PS files. ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat()); ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat()); ImGearPDF.Initialize();

Copy Code

// Initialize evaluation license.
ImGearEvaluationManager.Initialize();
ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark;

// Initialize common formats.
ImGearCommonFormats.Initialize();

// Add support for PDF and PS files.
ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat());
ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat());
ImGearPDF.Initialize();

VB.NET	Copy Code
' Initialize evaluation license. ImGearEvaluationManager.Initialize() ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark ' Initialize common formats. ImGearCommonFormats.Initialize() ' Add support for PDF and PS files. ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat()) ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat()) ImGearPDF.Initialize()

VB.NET

Copy Code

' Initialize evaluation license.
ImGearEvaluationManager.Initialize()
ImGearEvaluationManager.Mode = ImGearEvaluationMode.Watermark

' Initialize common formats.
ImGearCommonFormats.Initialize()

' Add support for PDF and PS files.
ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePDFFormat())
ImGearFileFormats.Filters.Insert(0, ImGearPDF.CreatePSFormat())
ImGearPDF.Initialize()

There is one main data structure that is used in this sample code: The ImGearDocument that holds the entire loaded document.

CS
VBNET

C#	Copy Code
// Load PDF document. ImGearDocument igDocument = ImGearFileFormats.LoadDocument(inStream);

VB.NET	Copy Code
' Load PDF document. Dim igDocument As ImGearDocument = ImGearFileFormats.LoadDocument(inStream)

You can save the loaded document using:

CS
VBNET

C#	Copy Code
// Save PDF. ImGearPDFSaveOptions pdfOptions = new ImGearPDFSaveOptions(); ImGearFileFormats.SaveDocument(igDocument, outStream, 0, ImGearSavingModes.OVERWRITE, ImGearSavingFormats.PDF, pdfOptions);

VB.NET	Copy Code
' Save PDF. Dim pdfOptions As New ImGearPDFSaveOptions() ImGearFileFormats.SaveDocument(igDocument, outStream, 0, ImGearSavingModes.OVERWRITE, ImGearSavingFormats.PDF, pdfOptions)

This sample project was created as a simple introduction to using the PDF functionality in ImageGear. For systems designed for production environments, you need to configure your projects more efficiently by only adding the resources that you need. For more information, refer to Deploying Your Product.