| | Enumeration | Description |
|---|
 | ImGearAlarms |
This enumeration determines specific audible alarms.
|
| ImGearAudioFormats |
This enumeration determines which Audio file formats are supported.
|
| ImGearBarcodeRotation |
The bar code's orientation on the scanned image.
|
| ImGearBarcodeSearchModes |
This enumeration restricts barcode searching to certain orientations, or prioritizes one orientation
over the other.
|
| ImGearBarcodeType |
This enumeration lists different bar code types.
|
| ImGearBitDepthReduction |
This enumeration specifies the Reduction method the Source should use to reduce the bit depth of the data.
|
| ImGearBitOrder |
This enumeration specifies how the bytes in an image are filled by the Source.
|
| ImGearCapabilities |
Supported capabilities.
|
| ImGearClearBuffers |
This enumeration determines the type of buffer clearing process.
|
| ImGearColorDataFormats |
This enumeration allows the application and Source to identify which color data formats are available.
|
| ImGearContainerType |
Capability container type. Defines how the data for a capability is stored.
|
| ImGearCountries |
Country constants.
|
| ImGearDeskewStatus |
Status of the deskew operation.
|
| ImGearDeviceEvents |
This enumeration determines the device event.
|
| ImGearDuplex |
This enumeration determines whether the scanner supports duplex.
|
| ImGearFeederAlignment |
This enumeration determines which special actions application may need to take when negotiating
frames with the Source.
|
| ImGearFeederOrder |
This enumeration determines the order of scanning.
|
| ImGearFileSystem |
This enumeration is for an undocumented TWAIN 1.8 capability.
|
| ImGearFileType |
File types in the device's file system.
|
| ImGearFilterType |
This enumeration determines the color characteristic of the subtractive filter applied to the image data.
|
| ImGearFlashUsed |
This enumeration determines which flash the image was acquired to use.
|
| ImGearFlipRotation |
This enumeration determines the orientation of images that flip orientation of every other image.
|
| ImGearImageFilter |
This enumeration determines the algorithm used to improve the quality of the image.
|
| ImGearJobControl |
This enumeration determines how the job can be processed.
|
| ImGearJPEGQuality |
This enumeration specifies the kind of JPEG quantization tables that tradeoff quality versus
compressed image size.
|
| ImGearLanguages |
Language constants.
|
| ImGearLightPath |
This enumeration determines whether the image is captured transmissively or reflectively.
|
| ImGearLightSource |
This enumeration determines the general color characteristic of the light source used to acquire the image.
|
| ImGearMessages |
Capability control messages.
|
| ImGearNoiseFilter |
This enumeration selects the algorithm used to remove noise.
|
| ImGearOrientation |
This enumeration determines which edge of the paper the image's top is aligned with.
|
| ImGearOverscanModes |
This enumeration determines the overscanning mode.
|
| ImGearPatchCode |
This enumeration lists different patch code types.
|
| ImGearPixelFlavor |
This enumeration correctly describes the sense of the pixel whose numeric value is zero (minimum
data value).
|
| ImGearPixelType |
This enumeration specifies the type of pixel data that a Source is capable of acquiring (for
example, black and white, gray, RGB, etc.).
|
| ImGearPowerSupply |
This enumeration reports the kinds of power available to the device.
|
| ImGearPrinter |
This enumeration determines the printer devices being used by application.
|
| ImGearPrinterModes |
This enumeration specifies current printer mode.
|
| ImGearSupportedSizes |
This enumeration specifies the size(s) the Source can/should use to acquire image data.
|
| ImGearUnits |
This enumeration determines the unit of measure for all quantities.
|
| ImGearXferType |
This enumeration determines which type of transfer mechanisms the application and Source have in common.
|
