Syntax
Visual Basic
C#
Managed Extensions for C++
C++/CLI
Parameters
- page
- Page to apply the LUT to.
- LUT
- Multichannel LUT that shall be applied.
Remarks
This method applies a multichannel lookup table to each channel of the image, optionally changing channel depths.
Number of single-channel LUTs in the multichannel LUT must match number of image channels. Input depth of each single-channel LUT must match the depth of corresponding channel. Depths of image channels after transform are determined by output depths of the coresponding single-channel LUTs.
Example
| C# |  Copy Code |
|---|---|
// Make sure the image is gray. if (!ImGearRasterProcessing.ImageIsGray(igRasterPage)) return; // Create a LUT to convert image from 8bit to 4bit while also inverting. ImGearMultichannelLUT igMultichannelLUT = new ImGearMultichannelLUT( igRasterPage.DIB.ChannelCount, 8, 4); for (int i = 0; i < 255; ++i ) { igMultichannelLUT[0][i] = 15 - (i / 16); } // Transform the image with the LUT. ImGearRasterProcessing.TransformWithLUT(igRasterPage,igMultichannelLUT); | |
| Visual Basic | Copy Code |
|---|---|
' Make sure the image is gray. If Not ImGearRasterProcessing.ImageIsGray(igRasterPage) Then Return End If ' Create a LUT to convert image from 8bit to 4bit while also inverting. Dim igMultichannelLUT As New ImGearMultichannelLUT(igRasterPage.DIB.ChannelCount, 8, 4) For i As Integer = 0 To 254 igMultichannelLUT(0)(i) = 15 - (i / 16) Next ' Transform the image with the LUT. ImGearRasterProcessing.TransformWithLUT(igRasterPage, igMultichannelLUT) | |
