ImageGear Professional v18 for Mac
Loading and Saving DICOM Images

With the MD component loaded, your application is ready to load and save DICOM image files in addition to the file formats normally supported by ImageGear.

See DICOM in the File Formats chapter for detailed information about ImageGear support for the DICOM format.

Loading DICOM Images

Load DICOM images in the same way as you load images of all other formats, using one of the Formats Component loading methods. You can use Page or Document loading modes, and all Image Sources that are supported by the Formats Component. Use DICOM Filter Control Parameters to control loading of the DICOM images.

Saving DICOM Images

There are several ways to save DICOM images using ImageGear Medical. The functions included as part of the MD component API have a number of DICOM specific parameters. The others are included in the baseline API. You may need to pass the DICOM parameters to these functions via the Filter Control Parameters. You can also use the ImageGear's Multi-page Image API to load and save multi-page (cine) DICOM images. The saving functions are listed below.

Description DLL
DICOM-specific saving function MED_DCM_save_DICOM()
DICOM-specific saving function for a file that has already been opened and for which you have a File Descriptor handle MED_DCM_save_DICOM_FD()
One of the baseline ImageGear saving functions

IG_save_file()

IG_save_FD()

IG_save_mem()

IG_fltr_save_file()

The important consideration in writing a DICOM image is whether the image being saved out was originally a DICOM image. If the image was originally a DICOM image (and assuming that you have not altered its Data Set to contain illegal values), the saving of such an image is quite a simple process. This chapter describes how to save an image that has a valid Data Set, how to use the DICOM-specific saving functions, and what Image Control options can be used to save the image when using the baseline functions.

This section provides information about the following:

Using the DICOM Specific Saving Function

MED_DCM_save_DICOM() saves the DICOM file using the name specified by the first argument. Here is a sample call:

 
Copy Code
   MED_DCM_save_DICOM("OmyBack.dcm", hIGear,
   MED_DCM_TS_JPEG_LOSSY_8, TRUE, TRUE,
   MED_DCM_PLANAR_PIXEL_BY_PIXEL, TRUE, 100, 0);

Notice that the setting for Transfer Syntax in the sample call indicates that JPEG compression should be used on the file. For this reason the second-to-last argument nJPEGQuality is used. This is the quality setting for lossy JPEG compression. The setting shown (100) results in the highest quality that is possible using this compression scheme. If another Transfer Syntax had been specified, the setting of nJPEGQuality would have been meaningless.

Note that DICOM is a multi-page format. When you save an image into existing DICOM file, ImageGear tries to append this image at the end of the file. If for some reason appending of the image is not possible, ImageGear returns an error. If you do not want to append a page, delete the existing file before saving to that filename, or use IG_fltr_save_file() with the bOverwrite parameter set to TRUE.

Saving a DICOM Image Using a File Descriptor

If you are saving a DICOM image to a file for which you have a File Descriptor handle, call MED_DCM_save_DICOM_FD(). Here is a sample call:

 
Copy Code
      MED_DCM_save_DICOM_FD(fd, hIGear, MED_DCM_TS_EXPLICIT_VR_LE, FALSE, TRUE,
MED_DCM_PLANAR_PIXEL_BY_PIXEL, TRUE, 0, 0);

Saving a DICOM Image Using Baseline ImageGear API Calls

ImageGear baseline API functions can also be used to save a DICOM image. However as these functions do not contain any of the custom parameters for saving a DICOM image, you may need to make some Filter Control calls first. You will find the list of available DICOM filter control parameters for saving in the section DICOM Filter Control Parameters.

Here is an example of setting DICOM filter control parameters for saving and then calling the baseline saving function. All of the parameters values used below are different from the component's default values:

 
Copy Code
/* get current value of SAVE_SYNTAX control parameter */
IG_fltr_ctrl_get(IG_FORMAT_DCM, "SAVE_SYNTAX", FALSE, NULL, NULL,
(LPVOID)nSaveSyntax, sizeof(nSaveSyntax));
/* set new value to SAVE_SYNTAX control parameter */
IG_fltr_ctrl_set(IG_FORMAT_DCM, "SAVE_SYNTAX", (LPVOID)MED_DCM_TS_EXPLICIT_VR_LE,
sizeof(nSaveSyntax));
/* get current value of SAVE_SMALLEST control parameter */
IG_fltr_ctrl_get(IG_FORMAT_DCM, "SAVE_SMALLEST", FALSE, NULL, NULL,
(LPVOID)bSaveSmallest, sizeof(bSaveSmallest));
/* set new value to SAVE_SMALLEST control parameter */
IG_fltr_ctrl_set(IG_FORMAT_DCM, "SAVE_SMALLEST", (LPVOID)TRUE,
sizeof(bSaveSmallest));nErrcount = IG_save_file(hIGear, "knee.dcm", IG_SAVE_DCM);

Saving DICOM Images with JPEG Compression

ImageGear supports the following modes for saving JPEG compressed DICOM images:

Saving out a DICOM Image from a Non-DICOM Image

If you have created a Data Set for a loaded non-DICOM image and wish to save it, please remember that it is up to you to add all the Mandatory Data Elements to make it a valid Part 3 DICOM file. When you create the Data Set, a handful of basic Data Elements are added to it. These values were taken from the image. Note that they are not sufficient to satisfy the requirements of Part 3 of the Standard.

Saving a Multi-Frame DICOM Image

ImageGear MD component allows you to save single-frame as well as multi-frame (multi-page) images. Saving a multi-frame DICOM image is pretty straightforward. Use any standard image saving function from ImageGear baseline API. Image saving functions from Medical API do not support saving of multi-frame images.

Use the following steps to create a multi-frame image:

* Repeat for all consequent frames.

Several limitations that are imposed by the DICOM standard are listed below.

All frames of the image should have same dimensions, bit depth and photometric interpretation. All frames should use the same Transfer Syntax (compression). ImageGear returns an error if these conditions are not met.

It is important to note that only a few DICOM modalities allow the presence of multiple frames in the image, while the others do not. When you try to add a frame to an existing DICOM file, ImageGear checks the file for presence of the NumberOfFrames (0028, 0008) Data Element. If it is present ImageGear tries to append the frame, otherwise ImageGear considers the file as belonging to a single-frame modality and returns an error.

Another important fact about DICOM format is that it has a continuous structure which means all the Data Elements as well as image frames go one after another. This results in the following limitations:

If you need to insert or delete a frame, or modify DataSet in the DICOM image, create a new image with the modified DataSet, copy necessary frames to it, and then delete the original image.

Saving DICOM Images Using ImageGear's Multi-Page Image API

You can use ImageGear's Multi-page Image API calls (IG_mpi_... and IG_mpf_...) for loading and saving multi-frame DICOM images. Just note that ImageGear Medical only supports the appending of frames but not insertion, deletion or overwriting of frames.

 

 


©2016. Accusoft Corporation. All Rights Reserved.

Send Feedback